Indoor LED vs. Semi Outdoor LED

Filament style LED

Nested Lamp

Indoor LED is a filament based Dot Matrix system. It has a brightness level of
300 Cd/m2 (Candesence Measure)

Light is directed foward with a side reach of 35%

Semi-Outdoor LED is a lamp based LED conclave of nested pixels. It has a brightness level of 1000 Cd/m2 (Candescence Measure)

Light is directed foward with a side reach of 55%

Resolution

The Tricolor dot matrix patten is positioned inside each module section. The picture above shows how each filament is located. When a filament inside the pixel area illuminates it shows RED. A different command will turn on a different level filament within the same pixel area to illuminate GREEN, AMBER etc.

Resolution is the distance from pixel area to pixel area.

Resolution

The Tricolor LAMP pattern shown above is the combination of two lamps being tightly nested together to form an up right bottom left pixel position. Take a close look at when two pixels are illuminated to give a visual appearance of Amber. RED and GREEN are both illuminated appearing as Amber. The picture also shows the top as GREEN only and the bottom as RED only.

Resolution is the distance from the grouped pixels (R+G) to the next group.

Remote Control Programming

This sign is specially designed for remote control programming. All functions can be accessed by remote control except Graphic file saving. Animations, texts, colors and sequences are easy to program using hand held infrared remote control piece. 1-2 lines can be remote control programmed.

Remote Control Programming

This sign is specially designed for remote control programming. All functions can be accessed by remote control except Graphic file saving. Animations, texts, colors and sequences are easy to program using hand held infrared remote control piece. 1-2 lines can be remote control programmed.

Warranty

12 month limited warranty

Warranty

12 month limited warranty